







A leaking corner, a loose hanger or a single sagging section can usually be repaired. Replacement makes more sense when leaks keep coming back in different spots, several sections are failing or the system is too small for your roof. We will give you an honest recommendation after looking at your eavestroughs, downspouts and the fascia behind them.
get a free estimate


Most leaks start at corners, end caps and joints where the sealant has failed, or at holes from rust or damage. Water can also get behind the eavestrough when it is pulling away from the fascia. Finding where the water is actually coming from is the first step.
Usually, yes. Sagging sections can often be re-hung with new hangers at the right spacing and set back to the proper slope. If the fascia behind them is soft or rotting, it needs to be repaired first so the hangers have something solid to hold.
Common causes are clogs from leaves and debris, too few or undersized downspouts, eavestroughs that are too small for the roof, or a slope that lets water sit. The fix can be as simple as clearing a blockage or as involved as adding downspouts or gutter protection.
Replacement usually makes more sense when leaks keep coming back in different spots, several sections are sagging or corroded, the system is too small for your roof, or you are replacing soffit and fascia anyway.
Yes. Snow and ice add a lot of weight, and freeze and thaw cycles make small leaks and loose sections worse. Eavestroughs that drain properly are also less likely to fill with ice and pull away from the house.
Looking for another exterior upgrade? Reynolds Brothers Exteriors also offers:
• Siding installation & replacement
• Gutter protection systems
• Exterior finishing for new builds
Whether you're upgrading your home or wrapping up a new build, our team delivers clean, reliable exterior work that holds up season after season.

.png)



